Repair Mariner Centerboard
Rosenthal 1975 Mariner Centerboard ME
Rosenthal 1975 Mariner Centerboard ME
Although this family has owned the boat for 7+ years, they have never had the opportunity to commission their Mariner to OEM specifications.
XDYF2935M75F
MAST
step mast & tune rig to advise owner of recommended rigging work due to safety or condition
Install Mast Rigging
inspect mast, boom, standing rigging, running rigging, replace & install as required
check tabernacle repair weld
check shackle on mainsheet boom block install topping lift
replace standing rigging
add Topping Lift Kit
CENTERBOARD
Set up Boat for Service
Cast Iron Centerboard Service
remove from hull, clean, prime, seal, install plus materials
Bottom Painting / Centerboard & Trunk with Antifouling Paint
BOTTOM PAINTING - MATERIALS Anti-rust Centerboard Service Materials
CAST IRON SERVICE MATERIALS
CENTERBOARD MATERIALS
FIBERGLASS DETAILING
recommended to preserve the gelcoat finish
Power Wash Hull Minimum
may also include fittings, keel, centerboard, rudder, mast, rigging, trailer
Power Wash Deck Minimum
may also include rubrail, hardware, fittings, wood trim, floorboards, bilge, interior cabin,
lockers, lines
Hull, Deck & Cockpit Finish
wash, compound, finesse, restore, wax
FIBERGLASS DETAILING MATERIALS
CABIN & LOCKER MOLD ABATEMENT
remove & dispose of paraphernalia whole lot'a scrubbing going on repack with the good stuff
Bleach
DECK HARDWARE
inspect deck to determine if a ventilation system exists prior to this recommended work
Install Exhaust Vent to manage molds in future
Install Mooring Cleat & Chocks
Install Compass
WOODWORK Weatherboard Set - Refinish
3-pc mahogany boards may be warped and thick with varnish
Weatherboard & Hatch Sliders - Refinish
RUDDER & TILLER
owner says line on rudder pennant is too short
TRAILER
inspect trailer to be safe for trip back to Deer Isle
service & replace - tires & wheels, lights, winch & post, bunks & rollers, painting left & right
tires go flat
replace roller under stem bow roller on trailer